Fire tri-division with three aluminum valves

Water curtains are an effective solution for protecting equipment against heat by forming a barrier of sprayed water, mainly used in industrial environments and for fire protection. They limit heat propagation, protect sensitive equipment and reduce the risk of fire. Available in different flow rates and inlet types, these systems comply with safety standards and offer reliable protection. MMF Protection et Sécurité offers water curtains manufactured in France, guaranteeing quality and reliability.

The Universal Tricoise Wrench is an essential tool for work on fire networks. Made of non-sparking brass, it handles half-couplings from DN 20 to 115 with safety and efficiency.

The Red Epoxy DN 50-100 Tricoise Wrench is designed for fire hydrant fittings in diameters from 50 to 100 mm. Its red epoxy finish ensures wear resistance, maximum visibility and safe handling in the field. Ideal for firefighters, technical services and emergency response.

Reinforced galvanized steel wrench designed to securely tighten claw-type fire connections from DN 50 to DN 100.

A robust and indispensable tool for professionals, guaranteeing reliable assembly and rapid intervention on hydraulic networks.

Scotty water curtain for fire protection water walls. Available in 60, 115 or 200 L/min. 1"1/2 BSP female thread (without connection). Effective solution for humidifying, protecting and limiting the spread of flames in sensitive areas.

The 1-1/2" male BSP x 1" female BSP reducer with gasket allows you to adapt a 1-1/2" diameter BSP threaded connection to a 1" outlet. Made of lightweight, corrosion-resistant engineering polymer, it is equipped with a gasket to ensure a leak-tight connection. It is suitable for water lines, valves, handheld nozzles, foam injectors, or BSP-compatible firefighting accessories that require a reduction in diameter.

The in-line foam injector with a check valve and metering valve allows a foam concentrate to be introduced into a DN40 (1-1/2") fire line to produce a foam solution that can be used directly with a compatible handheld nozzle or foam tube. Its metering valve allows for the selection of several dosing rates: OFF, 0.2%, 0.5%, 0.7%, 1%, 2%, and 3%. It can be mounted on the pump, at the fire handheld nozzle, or at the facility, with a maximum downstream length of 45 m when the injector is installed on the pump. Available in 115 L/min and 190 L/min kits.

The Scotty in-line foam injector is available in three models: 60 L/min, 115 L/min, and 200 L/min. It allows foam concentrate to be injected directly into a compatible fire line to produce a metered water/foam mixture. Set at 1% and supplied without a hose, it is suitable for mobile or temporary setups where the suction device is provided separately.