Home
>
Fire equipment
>
Valves and accessories
>
In-line foam injector with metering valve and hose

In-line foam injector with metering valve and hose | MMF.fr

In-line foam injector with metering valve and hose

The in-line foam injector with a check valve and metering valve allows a foam concentrate to be introduced into a DN40 (1-1/2") fire line to produce a foam solution that can be used directly with a compatible handheld nozzle or foam tube. Its metering valve allows for the selection of several dosing rates: OFF, 0.2%, 0.5%, 0.7%, 1%, 2%, and 3%. It can be mounted on the pump, at the fire handheld nozzle, or at the facility, with a maximum downstream length of 45 m when the injector is installed on the pump. Available in 115 L/min and 190 L/min kits.

Adjustable dosage depending on the foam concentrate and the operation

The dosing valve allows you to select the percentage based on the type of foam concentrate used and the desired application. The available settings are: OFF, 0.2%, 0.5%, 0.7%, 1%, 2%, and 3%.

This adjustment range allows the foam concentrate injection to be adapted to various scenarios: additive application, foam production, industrial risk response, agricultural use, or use with foam concentrates requiring specific concentrations.

Installation at the pump or at the end of the line

The injector can be mounted at the pump or at the end of the line. When the injector is installed at the pump, the maximum recommended downstream hose length is approximately 45 m (150 ft).

To maintain consistent foam production, the injector must be paired with a foam handheld nozzle r or foam head with the same flow rate. The selection of flow rate, injection ratio, foam concentrate, and downstream hose length must be verified before use.

Technical Specifications

Technical Specifications – In-line Foam Injector with Dosing Valve
Product Type	In-line foam injector / proportioner
Composition	Foam injector with check valve, metering valve, and suction hose system for a 5-gallon container
Compatible line	DN40 (1½")
Available Models	115 L/min Kit and 190 L/min Kit
Percentage settings	OFF, 0.2%, 0.5%, 0.7%, 1%, 2%, and 3%
Available flow rates	Approximately 60, 115, or 190 L/min depending on the version (15, 30, or 50 GPM)
Installation	At the pump, at the facility, or at the end of the line
Maximum downstream length when mounted on the pump	45 m (150 ft)
Related equipment	Handheld nozzle or a foam tube with the same flow rate

Application

production of foaming solution on a fire line;
suction of foam concentrate from a 5-gallon container;
application of foam with adjustable flow rate;
operations requiring multiple concentration levels;
installation at the pump or at the end of the line;
use with handheld nozzle or a foam nozzle compatible with the injector’s flow rate;
Farmers.

FAQ – In-line foam injector with check valve and shut-off valve

What does this version of the foam injector include?

This version includesthe foam injector, the check valve and shut-off valve, and the suction system for a 5-gallon container.

What is the dosing valve used for?

The variable valve allows you to adjust the foam concentrate injection rate as needed. The available settings are OFF, 0.2%, 0.5%, 0.7%, 1%, 2%, and 3%.

How do I choose the injector flow rate?

The flow rate must match that of the foam handheld nozzle r or foam head being used. The corresponding manufacturer models are available in 15, 30, or 50 GPM, which is approximately 60, 115, or 190 L/min. This product is available as a 115 L/min kit and a 200 L/min kit.

Can the injector be installed directly on the pump?

Yes. The injector can be mounted on the pump or at the end of the line. When mounted on the pump, the length of the downstream hose must not exceed 45 m.

8 other products in the same category:

Peacock tail water curtain Storz fitting

Valves and accessories

€472.76 (tax excl.)

The AWG water curtain is an innovative solution for creating an effective barrier against gases and smoke, while providing optimum cooling. Made of lightweight, resistant aluminum, it is easy to install and handle. With a spray range of up to 31 m, it provides effective protection for fire safety and operations in high-risk environments. Modular, it can be combined with other curtains for extended coverage. Ideal for firefighters, industry and risk management.

KEYSER 90° elbow for fire supply

Valves and accessories

€569.95 (tax excl.)

Keyser 90° female elbow DN100 for fire supply, available in AR100, B/75 Storz or DSP40 versions. Robust aluminum-alloy construction, designed to limit pressure loss and ensure reliable connection of hydraulic systems and pumps in demanding professional environments.

Peacock tail water curtain from 400 to 1150 l/mn

Valves and accessories

€390.46 (tax excl.)

Water curtains are an effective solution for protecting equipment against heat by forming a barrier of sprayed water, mainly used in industrial environments and for fire protection. They limit heat propagation, protect sensitive equipment and reduce the risk of fire. Available in different flow rates and inlet types, these systems comply with safety standards and offer reliable protection. MMF Protection et Sécurité offers water curtains manufactured in France, guaranteeing quality and reliability.

Aluminum utility wrench for fire hydrants 20336 | MMF.fr

Aluminum all-purpose wrench for fire hydrants

Valves and accessories

Reference: 20336

€197.14 (tax excl.)

Aluminum all-purpose wrench for fire hydrants with 30 mm square. Robust, lightweight and versatile for fire safety professionals.

Steel wrench DN 20 to 65

Valves and accessories

Reference: 20723

€9.87 (tax excl.)

The DN 20 to 65 steel pipe wrench is a robust and versatile professional tool designed for plumbing and maintenance work. Made from high-quality steel, it offers maximum strength and precise tightening on pipes of various diameters (DN 20 to 65). Ergonomic and durable, it provides a comfortable and secure grip. Ideal for plumbers and other tradesmen, it guarantees efficient, high-quality work on plumbing installations.

DMA/BRONZE valve DN 20 fire hose reel ROT 20970 | MMF.fr

DMA/BRONZE valve DN 20 RIA ROT

Valves and accessories

Reference: 20970

€115.32 (tax excl.)

The DN 20 RIA ROT bronze DMA valve is a key element in fire-fighting systems. Made from robust bronze, it offers optimum resistance to extreme conditions and ensures rapid watering thanks to its rotating mechanism. Easy to install and compliant with safety standards, it guarantees effective protection for industrial, commercial and residential buildings.

Bonnot 100 cm octagonal tongs for firefighters

Forcement firefighting tools

Reference: 21942

€29.73 (tax excl.)

The Bonnot 100 cm octagonal pliers are a high-strength steel forcing tool designed for firefighters, ideal for lifting, spreading and ripping operations. Its octagonal shape and length provide powerful leverage and an excellent grip, guaranteeing performance and reliability in demanding conditions.

Fire division with three aluminum valves MMF.fr

Fire tri-division with three aluminum valves

Valves and accessories

€882.17 (tax excl.)

The three-valve Tri Division is an essential piece of equipment for optimizing flow distribution in fire-fighting networks. Available in PN 25 and PN 16, its globe valves provide precise control, preventing water hammer and reducing head losses. Robust and compact, it is designed to withstand demanding environments and guarantee fast, efficient intervention. Manufactured in France and distributed by MMF Protection et Sécuritéit is the ideal choice for fire safety professionals.